The CARBOMAX PLUS is the renowned thermal analysis instrument for Carbon Equivalent (%Ce), Carbon (%C) and Silicon (%Si) results of a sample during the cast iron melting process. It has a micro-controlled circuit for even more reliable results and features such as digital outputs for communication with other peripherals (printers or its own traceability software).

The principle of operation follows the analysis of the cooling curve of a metal sample taken from the furnace/pan and poured into an analysis capsule containing Tellurium (ITALCARB K). Through the temperatures of the "Liquidus" and "Solidus" levels (metastable eutectic system), the results and the confirmation of its charge calculation are indicated with excellent precision in at least 3 minutes on the furnace platform.

The Thermal Analysis Capsule is connected to the CARBOMAX PLUS via a 'K' type Receptacle mounted on a support (Pedestal) and connected to a 'K' type extension cable.

The operation of the CARBOMAX PLUS is very simple and the parameters for detecting thresholds are pre-set at the factory and protected by a non-volatile memory, allowing the instrument to be installed and ready for use without any major configurations or setbacks.

It does not require skilled labor to operate and the response time is much shorter compared to other methods as reliable as CARBOMAX PLUS.

Due to its simplicity of operation and installation, it provides greater productivity gains, reducing waiting times and reducing the time it takes to correct the material.

MAIN FEATURES

- Range: 1000°C to 1400°C ('K' type);
- Accuracy: CE: 0.01%, C: 0.03% and Si: 0.12%;
- Range of use: CE from 3.00% to 4.65%;
- Detection of thresholds: by derivative of the curve.
- 4 Si, C and CE adjustments (result compensation when compared to other methods, if desired);
- Dedicated software output;
- Built-in analysis status indicator (Green, Yellow and Red);
- History to consult the last 100 measurements on the instrument itself;
- Batch/race number inscription.

‍